VANCOUVER, BC, Oct. 3, 2022 /CNW/ – First Energy Metals Ltd. (CSE: FE) (“First Energy” or the “Company) is pleased to announce that it has received assays from its summer prospecting work program which was carried on the newly acquired claim block on March 22, 2022, see below link for further details.
https://www.newswire.ca/news-releases/first-energy-metals-adds-prospective-ground-to-its-existing-lithium-footprint-in-quebec-886834748.html 

The work identified several prospective lithium pegmatites with assays in the range of 0.01 to 6.02% lithium oxide (Li2O). There are anomalous values of other rare metals including niobium, tantalum, rubidium and cesium.

• Area 1 has lithium oxide values in the range of 0.01 to 6.02% Li2O with two samples over 1% Li2O.
• Area 2 has lithium oxide values in the range of 0.02 to 2.19% Li2O with eight samples over 1% Li2O.
• Area 3 has generally low lithium oxide values in the range of 0.01 to 0.02% Li2O.
• Area 4 has lithium oxide values in the range of 0.01 to 0.04% Li2O.

The prospecting and sampling work was carried out during the summer months and its purpose was to find new exploration targets, to locate and confirm historical reported lithium pegmatite occurrences, and to locate historical drill holes if present. The ground sampling work was continuous concluded at the end of September and more surface sample results will be released as soon as available.

The Company is also pleased to announce that it has completed additional 1,000 meters of diamond core drilling at the Augustus property. The drill holes are being logged and an update on the drilling work will be provided in a subsequent news release.

The surface sampling was carried out using a rock saw and other hand tools by cutting about 20-30 cm long, 5 cm wide and 3-5 cm deep cuts in bedrock. The samples were bagged and tagged using best practices and were delivered to Activation Laboratories (“ACTLABS”), Ancaster, Ontario for sample preparation and analyses using laboratories code Ultratrace 7 as summarized below. ACTLABS is an independent commercial, accredited ISO Certified Laboratory.  

Samples are fused with sodium peroxide in a Zirconium crucible. The fused sample is acidified with concentrated nitric and hydrochloric acids. The resulting solutions are diluted and then measured by ICP-OES and ICP-MS. All metals are solubilized.

ICP-MS
Fused samples are diluted and analyzed by Agilent 7900 ICP-MS. Calibration is performed using five synthetic calibration standards. A set of (10-20) fused certified reference material is run with every batch of samples for calibration and quality control. Fused duplicates are run every 10 samples.

ICP-OES
Samples are analyzed with a minimum of 10 certified reference materials for the required analytes, all prepared by sodium peroxide fusion. Every 10^th sample is prepared and analyzed in duplicate; a blank is prepared every 30 samples and analyzed. Samples are analyzed using a Varian 735ES ICP and internal standards are used as part of the standard operating procedure. Source: https://actlabs.com/geochemistry/lithogeochemistry-and-whole-rock-analysis/peroxide-total-fusion/

Afzaal Pirzada, P.Geo., Geological Consultant of the Company, and a “Qualified Person” for the purposes of National Instrument 43-101 – Standards of Disclosure for Mineral Projects, has reviewed and approved the scientific and technical information contained in this news release.

ON BEHALF OF THE BOARD OF
FIRST ENERGY METALS LTD.

“Gurminder Sangha”
Gurminder Sangha
CEO & Director

Neither the Canadian Securities Exchange (CSE) nor its Regulation Services Provider accepts responsibility for the adequacy or accuracy of this news release and has neither approved nor disapproved the contents of this news release.

Except for the statements of historical fact, this news release contains “forward-looking information” within the meaning of the applicable Canadian securities legislation that is based on expectations, estimates and projections as at the date of this news release. “Forward-looking information” in this news release includes information about the Company’s information concerning the intentions, plans and future actions of the parties to the transactions described herein and the terms thereon.

The forward-looking information in this news release reflects the current expectations, assumptions and/or beliefs of the Company based on information currently available to the Company. In connection with the forward-looking information contained in this news release, the Company has made assumptions about the Company’s ability to obtain required approvals. The Company has also assumed that no significant events occur outside of the Company’s normal course of business. Although the Company believes that the assumptions inherent in the forward-looking information are reasonable, forward-looking information is not a guarantee of future performance and accordingly undue reliance should not be put on such information due to the inherent uncertainty therein.

Table 1: Surface Samples Assay Highlights

 

SOURCE First Energy Metals Limited