Connect with us

Drilling News

Final Results from West Graham Nickel-Copper Deposit Drilling Program Confirm and Expand Historical Resource Mineralization at SPC Nickel’s Lockerby East Project, Sudbury, Ontario

Final Results from West Graham Nickel-Copper Deposit Drilling Program Confirm and Expand Historical Resource Mineralization at SPC Nickel’s Lockerby East Project, Sudbury, Ontario
Canada NewsWire
SUDBURY, ON, Dec. 6, 2022

SUDBURY, ON, Dec. 6, 2022 …

Share this article:

Published

on

Final Results from West Graham Nickel-Copper Deposit Drilling Program Confirm and Expand Historical Resource Mineralization at SPC Nickel’s Lockerby East Project, Sudbury, Ontario

Canada NewsWire

SUDBURY, ON, Dec. 6, 2022 /CNW/ – SPC Nickel Corp. (TSXV: SPC) (“SPC Nickel” or the “Company”), is pleased to announce the final batch of assay results from the 2022 drill program at the Company’s 100% owned Lockerby East Project (the “Project”) located in Sudbury, Ontario. These results expand the high-grade mineralized zone while also adding confidence in the continuity of the historic resource, which further advances the Company towards its goal of defining a near surface resource at West Graham.

Highlights:

  1. New assay results include hole WG-22-013 that intersected a broad zone of Ni-Cu mineralization over 40.83 metres grading 0.62% Nickel Equivalent (NiEq.) from 204.17 to 245.00 metres including a higher-grade zone of 0.82% NiEq. over 8.0 metres.
  2. All drill holes returned Ni-Cu intersections consistent or better than the historic West Graham resource. Highlights include 82.6 metres grading 0.68% NiEq. (WG-22-008, previously reported).
  3. Step-out drilling further defined and expanded the high-grade core of the West Graham resource. Highlights include 24.0 metres grading 0.97% NiEq. (WG-22-001, previously reported).

Grant Mourre, CEO and President of SPC Nickel commented, “The drill program at West Graham is now complete and has been a resounding success. Not only have we achieved much improved geological confidence in the historic resource, but we also significantly expanded the high-grade envelopes, discovered new zones of high-grade massive sulphide mineralization and interpreted a number of new high-grade shoots. We believe that an updated Resource Estimate at West Graham, scheduled for some time in 2023, will provide the market with a better understanding of this strategic asset’s value potential. We feel the West Graham deposit is developing into a key asset of the Company in what is arguably the top Nickel camp in the world.”

The unmined near-surface West Graham Nickel-Copper sulphide deposit contains over 47,000 tonnes of nickel and 34,000 tonnes of copper in indicated and inferred historical resources occurs on SPC’s 100% owned Lockerby East Property which also hosts the past producing Lockerby East Mine. The Company recently completed a 18 hole, 5,200 metres drill program designed to further evaluate and expand the higher-grade Ni-Cu zone hosted within the larger West Graham deposit (see April 27, 2022 press release). Results from the first 11 holes were  previously announced (see June 13, 2022July 13, 2022, September 6, 2022 and October 11, 2022 press releases).

New assay results are reported in Table 1, while all previously reported results are reproduced in Table 2.

The Company considers the West Graham and Lockerby East resource estimates to be historic mineral resources for purposes of NI 43-101.  Neither the Company nor a qualified person on behalf of the Company has done sufficient work to classify the historical estimates as current mineral resources and the Company is not treating such historical estimates as current mineral resources.  The Company considers the historic mineral resource estimates to be relevant to an understanding of the West Graham Project but has not done any work to validate the estimates.

Assay Results

Table 1: New Assay results from the West Graham drilling on the Lockerby East Project.

Table 1: New Assay results from the West Graham drilling on the Lockerby East Project. (CNW Group/[nxtlink id=

1. Width refers to downhole length. True widths for WG-22-011 are estimated at 75%, WG-22-013 are 60%, WG-22-014 are 75%, WG-22-015 are 80%, WG-22-016 are 90%, WG-22-017 are 90% and WG-22-018 are 70% of the downhole lengths.

2. 3E PGM represents Pd g/t + Pt g/t + Au g/t.

3. NiEq. % = Ni%+ Cu% x 0.32 + Co% x 0.53 and does not factor in Pt, Pd, Au or Ag values. No allowances have been made of recovery losses that may occur should mining eventually result. The NiEq.% calculation used in this release is consistent with the relative metal prices used in the West Graham resource report published by First Nickel Inc. in 2009.

Figure 1: Plan map of the West Graham deposit showing pierce points of all reported holes and historic holes used in the 2009 resource estimate1. Red dashed line is the outline of the West Graham resource projected to surface. Shaded red area are the high-grade zones with NiEq. values of ~1.0%. (CNW Group/[nxtlink id=

Figure 1: Plan map of the West Graham deposit showing pierce points of all reported holes and historic holes used in the 2009 resource estimate1. Red dashed line is the outline of the West Graham resource projected to surface. Shaded red area are the high-grade zones with NiEq. values of ~1.0%.

Table 2: Previously released 2022 assay results from the West Graham drilling on the Lockerby East Project.

Table 2: Previously released 2022 assay results from the West Graham drilling on the Lockerby East Project. (CNW Group/[nxtlink id=

1. Width refers to downhole length. True widths for WG-22-001 are estimated at 90%, WG-22-002 are 90%, WG-22-003 are 80%, WG-22-004 are 85%, WG-22-005 are 60%, WG-22-006 are 60%, WG-22-007 are 50%, WG-22-008 are 60%, WG-22-009 are 65%, WG-22-010 are 60% and WG-22-012 are 60% of the downhole lengths.

2. 3E PGM represents Pd g/t + Pt g/t + Au g/t.

3. NiEq.% = Ni%+ Cu% x 0.32 + Co% x 0.53 and does not factor in Pt, Pd, Au or Ag values. No allowances have been made of recovery losses that may occur should mining eventually result. The NiEq.% calculation used in this release is consistent with the relative metal prices used in the West Graham resource report published by First Nickel Inc. in 2009.

Lockerby East Project

The Lockerby East Project hosts both the historic West Graham and Lockerby East deposits. In 2009, First Nickel Inc. disclosed a historical resource estimate1 of 8.55Mt @ 0.45% Ni and 0.31% Cu (indicated) and 2.0Mt @ 0.38% Ni and 0.30% Cu (inferred) for the West Graham deposit. These grades have economic potential in the context of the Sudbury Mining Camp, as the deposit is located very near to surface and may be amenable to low-cost open pit mining.  The deposit is characterized by a broad zone of disseminated to semi-massive sulphide that ranges from 1.7 to 66 metres thick and strikes for 375 metres with a dip extent of up to 533 metres. Within the larger resource, a distinct zone of higher-grade mineralization grading ~1% NiEq. is present. As an example, drill hole WG-26 intersected a broad zone of mineralization grading 0.73% Ni, 0.28% Cu over 71.33 metres1 (from 56.69 metres) including a higher-grade section that returned 1.09% Ni, 0.41% Cu over 39.47 metres1. At depth, the West Graham deposit is interpreted to be contiguous with the high-grade Lockerby East deposit where, historic resources of 0.22 Mt @ 2.43% Ni and 0.78% Cu2 (indicated + inferred) are hosted.

The Company considers the West Graham and Lockerby East resource estimates to be historic mineral resources for purposes of NI 43-101.  Neither the Company nor a qualified person on behalf of the Company have done sufficient work to classify the historical estimates as current mineral resources and the Company is not treating such historical estimates as current mineral resources.  The Company considers the historic mineral resource estimates to be relevant to an understanding of the West Graham Project but has not done any work to validate the estimates. 

About the Sudbury Mining Camp3

The Sudbury Mining Camp is the 2nd largest Ni camp in the world, with over 130 years of continuous production. Since the discovery of the original ore deposits, over 11.1 million metric tons of Ni and 10.8 million metric tons of Cu, together with by-products of cobalt, silver, gold and platinum group elements have been mined from the deposits. Production continues to be generated from eight major mine complex and 21 smaller ore deposits around the outer margin of the Sudbury Basin; the principal mines are owned and operated by international mining companies (Vale, Glencore, and KGHM International). The economic wealth generated at Sudbury in terms of nickel and copper value alone is close to US$500 billion.

Reference

1.

NI 43-101 Report, Scott Wilson Mining, January 15, 2009, First Nickel Inc.; Technical Report on the West Graham Property Conwest Zone Resource Estimate, Graham Township, Ontario, Canada by Richard Routledge and Bruce Churchill.

2.

Technical Report on the 2009 Resource Estimate for the Depth, East and Upper West Zones, Lockerby Mine, Sudbury, Ontario, prepared by First Nickel Inc., February 23, 2009.

3.

Nickel Sulfide Ores and Impact Melts, Lightfoot, 2017, Elsevier Inc.

Quality Assurance, Quality Control and Qualified Persons

The technical elements of this news release have been approved by Mr. Grant Mourre, P.Geo. (PGO), CEO and President of SPC Nickel Corp. and a Qualified Person under National Instrument 43-101.

SPC Nickel follows rigorous sampling and analytical protocols that meet or exceed industry standards. Core samples are stored in a secured area until transport in batches to the ALS facility in Sudbury, Ontario, Canada.  Sample batches include certified reference materials, blank, and duplicate samples that are then processed under the control of ALS. All samples were analyzed in Vancouver by ALS Chemex. Platinum, palladium, and gold values were determined together using standard lead oxide collection fire assay and ICP-AES finish. Base metal values were determined using sodium peroxide fusion and ICP-AES finish. Silver values were determined using an aqua regia digestions and an AAS finish. A Certified Reference Material (CRM) standard, blank or duplicate is inserted on every 10th sample in the following order: CRM, blank, CRM, duplicate. The cycle repeats every 40 samples, thus ensuring that 10% of samples submitted are control samples.

About SPC Nickel Corp.

SPC Nickel Corp. is a Canadian public corporation focused on exploring for Ni-Cu-PGMs within the world class Sudbury Mining Camp. The Company is currently exploring its key 100% owned exploration projects Lockerby East and Aer-Kidd both located in the heart of the historic Sudbury Mining Camp and holds an option to acquire 100% interest in the Janes Project located approximately 50 km northeast of Sudbury. In addition, the Company recently acquired over 45,000 hectares covering a considerable proportion of the high prospective Muskox Intrusion, located in Nunavut. Although our focus is on Sudbury, we are an opportunistic company always looking for opportunities to use our skills to add shareholder value. Additional information regarding the Company and its projects can be found at www.spcnickel.com.

Cautionary Note on Forward-Looking Information

Except for statements of historical fact contained herein, the information in this news release constitutes “forward-looking information” within the meaning of Canadian securities law. Such forward-looking information may be identified by words such as “plans”, “proposes”, “estimates”, “intends”, “expects”, “believes”, “may”, “will” and include without limitation, statements regarding estimated capital and operating costs, expected production timeline, benefits of updated development plans, foreign exchange assumptions and regulatory approvals. There can be no assurance that such statements will prove to be accurate; actual results and future events could differ materially from such statements. Factors that could cause actual results to differ materially include, among others, metal prices, competition, risks inherent in the mining industry, and regulatory risks. Most of these factors are outside the control of the Company. Investors are cautioned not to put undue reliance on forward-looking information. Except as otherwise required by applicable securities statutes or regulation, the Company expressly disclaims any intent or obligation to update publicly forward-looking information, whether as a result of new information, future events or otherwise.

SOURCE SPC Nickel Corp.

drilling
drill program
drill hole
tsxv-spc
spc-nickel-corp
spc nickel corp
press-release

Share this article:

Drilling News

Valhalla Metals reports 21 metres of 6.84% CuEq at Sun Project, Alaska

Valhalla Metals Inc. [TSXV-VMXX; OTCQB-VMXXF] reported assay results from four diamond drill holes totaling 1,104…

Share this article:

Published

on

Continue Reading
Financing News

Capella Announces Definitive Agreement for the Sale of is Central Norway Copper-Cobalt Projects to NickelX and Financing Update

Capella Announces Definitive Agreement for the Sale of is Central Norway Copper-Cobalt Projects to NickelX and Financing Update
Canada NewsWire
VANCOUVER, BC, Oct. 17, 2023

VANCOUVER, BC, Oct. 17, 2023 /CNW/ – Capella Minerals Ltd (TSXV: CMIL) (OTC…

Share this article:

Published

on

By

Continue Reading
Drilling News

Canada Silver Cobalt Works Confirms Pegmatites up to 20 meters wide and 70 meters long at Sangster West

 

Pegmatite Confirmations and Advanced Geochemical Insights Propel Exploration Success

Coquitlam, BC – TheNewswire – October 17, 2023 – Canada Silver…

Share this article:

Published

on

By

Continue Reading

Trending