MONTREAL, QC / ACCESSWIRE / August 11, 2021 / Critical Elements Lithium Corporation (the "Company" or "Critical Elements") (TSX-V:CRE) (OTCQX:CRECF) (FSE:F12) is pleased to announce that the Minister of Environment and Climate Change (the "Minister") has rendered a favorable decision in respect of the proposed Rose Lithium-Tantalum Mining Project (the "Rose Lithium-Tantalum Project" or the "Project"). In a Decision Statement, which includes the conditions to be complied with by the Company, the Minister confirms that the Project is not likely to cause significant adverse environmental effects when mitigation measures are taken into account. This marks an important development for the Project. The Minister's news release is available on the Impact Assessment Agency of Canada's website.
The final remaining step in the Project's approval is the completion of the provincial permitting process, which runs parallel to the federal process. Pursuant to the James Bay and Northern Quebec Agreement (JBNQA), the provincial environmental assessment is conducted jointly by the Cree Nation Government and the Government of Quebec under the Environmental and Social Impact Review Committee ("COMEX"). The provincial assessment is already well advanced, as mentioned in the Company's news release dated March 8, 2021 and in the Company's news release dated June 18, 2021.
Pursuant to the Canadian Environmental Assessment Act, 2012 (CEAA 2012), an environmental assessment of the Project was conducted by a Joint Assessment Committee (the "Committee"), formed by the Impact Assessment Agency of Canada and the Cree Nation Government. This is the first environmental assessment prepared jointly by the federal government and the Cree Nation Government. The Committee took into account comments received during consultations with the Eastmain, Nemaska, Waskaganish and Waswanipi Cree Nations and the general public, as well as technical advice from various government departments and agencies. The Company filed its environmental impact assessment for the Project in August 2017. Throughout the assessment process, the Company has provided the competent authorities with various additional information to enable them to complete their analysis. In order to take into account the circumstances arising from the COVID-19 pandemic and its impacts on the Cree communities consulted, the deadline for issuing the declaration of decision for the Project was extended by the Minister and the Decision Statement was finally made public on August 10, 2021.
We are grateful to the government employees involved in the authorization process under the supervision of the Committee, particularly in view of the exceptional circumstances in which the work was carried out in recent months due to the COVID-19 pandemic. We also thank all the stakeholders, and particularly the Cree stakeholders, who participated in the federal process and thus helped improve the Project from both an environmental and social standpoint.
"We are very pleased with the decision regarding the Rose Lithium-Tantalum Environmental Assessment process, which brings us closer to the day when the project can move forward. Critical Elements has made stakeholder relations a priority since the Company's inception. We are excited about the prospect of moving forward with our plans in the James Bay Eeyou Istchee region," stated Jean-Sébastien Lavallée, CEO of Critical Elements.
The Rose Lithium-Tantalum site (where the Rose Lithium-Tantalum Project is proposed) is located in the Nord-du-Québec administrative region, in the Eeyou Istchee James Bay territory, more specifically on Category III land, on the Traditional Lands of the Cree Nation of Eastmain. Critical Elements has always considered developing the Project through a sustainable development approach, taking into account traditional Cree activities and ensuring the promotion of Cree economic and social development. The Cree Nation of Eastmain, the Grand Council of the Crees (Eeyou Istchee), the Cree Nation Government and Critical Elements signed an impact and benefit agreement, referred to as the Pikhuutaau Agreement (the "Pikhuutaau Agreement"), in July 2019. The announcement of the favourable Decision Statement will allow the Company to begin in a more concrete manner the implementation of the Pikhuutaau Agreement, which provides for training, employment and business opportunities for the Crees and particularly the Crees of Eastmain at the Project, as well as for the cooperation and involvement of the Cree parties with Critical Elements in the environmental monitoring during all phases of the Project. The Pikhuutaau Agreement also ensures financial benefits for the Cree parties on a long term basis, consistent with the Cree Nation Mining Policy and with Critical Elements' approach to develop the Project while ensuring the promotion of Cree economic and social development in a mutually beneficial manner.
The Company is continuing the work required to complete the provincial assessment process and hopes to announce its outcome shortly. Once the environmental and social impact assessment and review procedure is completed, the COMEX will make a recommendation in respect of the authorization of the Project by provincial authorities.
About Critical Elements Lithium Corporation
Critical Elements Lithium Corporation aspires to become a large, responsible supplier of lithium to the flourishing electric vehicle and energy storage system industries. To this end, Critical Elements Lithium is advancing the wholly owned, high purity Rose lithium project in Quebec. Rose is our first lithium project to be advanced within a highly prospective land portfolio of over 700 square kilometers. In 2017, the Company completed a robust feasibility study on Rose Phase 1 for the production of high quality spodumene concentrate. The internal rate of return for the Project is estimated at 34.9% after tax, with a net present value estimated at C$726 million at an 8% discount rate. Capital cost parameters were confirmed in 2019 by Primero Group in the context of a Guaranteed Maximum Price under an Early Contractor Involvement agreement, as a prelude to an Engineering, Procurement and Construction process. Detailed engineering for Phase I is expected to conclude this year as we also deliver technical studies for Phase II, the conversion of spodumene concentrate to high quality lithium hydroxide. In our view, Quebec is strategically well-positioned for US and EU markets and boasts exceptional infrastructure including a low-cost, low-carbon power grid featuring 93% hydroelectricity. We have a strong, formalized relationship with the Cree Nation.
For further information, please contact:
Cautionary statement concerning forward-looking statements
This news release contains "forward-looking information" within the meaning of Canadian Securities legislation. Generally, forward-looking information can be identified by the use of forward-looking terminology such as "scheduled", "anticipates", "expects" or "does not expect", "is expected", "scheduled", "targeted", or "believes", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking information contained herein include, without limitation, statements relating to the completion of the Project's approval, the completion of the provincial permitting process, mineral reserve estimates, mineral resource estimates, realization of mineral reserve and resource estimates, capital and operating costs estimates, the timing and amount of future production, costs of production, success of mining operations, the ranking of the project in terms of cash cost and production, permitting, economic return estimates, power and storage facilities, life of mine, social, community and environmental impacts, lithium and tantalum markets and sales prices, off-take agreements and purchasers for the Company's products, environmental assessment and permitting, securing sufficient financing on acceptable terms, opportunities for short and long term optimization of the Project, and continued positive discussions and relationships with local communities and stakeholders. Forward-looking information is based on assumptions management believes to be reasonable at the time such statements are made. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information.
Although Critical Elements has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Factors that may cause actual results to differ materially from expected results described in forward-looking information include, but are not limited to: the completion of the Project's approval, the completion of the provincial permitting process, Critical Elements' ability to secure sufficient financing to advance and complete the Project, uncertainties associated with the Company's resource and reserve estimates, uncertainties regarding global supply and demand for lithium and tantalum and market and sales prices, uncertainties associated with securing off-take agreements and customer contracts, uncertainties with respect to social, community and environmental impacts, uncertainties with respect to optimization opportunities for the Project, as well as those risk factors set out in the Company's year-end Management Discussion and Analysis dated August 31, 2020, the Company's Annual Information Form dated August 3, 2021, and other disclosure documents available under the Company's SEDAR profile. Forward-looking information contained herein is made as of the date of this news release and Critical Elements disclaims any obligation to update any forward-looking information, whether as a result of new information, future events or results or otherwise, except as required by applicable securities laws.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is described in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
SOURCE: Critical Elements Lithium Corporation
View source version on accesswire.com:
financing tsxv-cre critical-elements-lithium-corporation critical elements lithium corporation press-release
Nio Stock’s Slide Likely Isn’t Over as Broader Correction Looms
When I wrote about Nio (NYSE:NIO) last month, I argued that the risks that could send NIO stock lower outweighed factors that could help it bounce back.
The Chinese electric vehicle (EV) maker has numerous strengths, such as high projected rates of growth in its home market. It also has the potential to go global, first in Europe, and then possibly in other key markets like the United States.
However, I believe the company’s rich valuation and jurisdictional risk from China outweigh these positives. What’s more, the stock has taken a hit on concerns about the potential collapse of Chinese property development giant Evergrande (OTCMKTS:EGRNF).
In my opinion, NIO stock is nowhere near bottoming out and likely to move lower in the short term.
High Growth Far From Guaranteed
While NIO stock is down 47% from its all-time high of just below $67 per share, made in January, there’s still a good deal of enthusiasm surrounding the company.
The main driver of that enthusiasm is the company’s high projected levels of growth. Analysts forecast revenue will surge 120% this year and 65% in 2022.
Depending on how Nio’s expansion into Norway goes, growth from Europe could cause analysts to raise their growth forecasts. This could also help counter a growth slowdown in China. Nio faces stiff competition in the Chinese EV market from local rivals such as Xpeng (NYSE:XPEV), as well as from the likes of Tesla (NASDAQ:TSLA).
Despite the high-growth forecast, I do not expect sentiment for NIO stock to shift back to prior levels of bullishness for two reasons.
First, it’s not guaranteed that the company’s rate of growth will stay as high as it’s been in recent quarters. The global chip shortage resulted in Nio’s August vehicle deliveries falling by 25.9% on a month-over-month basis and caused management to cut its delivery outlook for the current quarter (ending Sept. 30). With the chip shortage expected to drag on, it may affect results in subsequent quarters as well. A Chinese economic slowdown, even if the Evergrande crisis gets under control, could also negatively affect sales growth going forward.
Second, the company’s European expansion could fail to deliver. If Nio stumbles in Norway, it may signal it doesn’t have what it takes to become a global EV brand.
Given these two big unknowns, I don’t see much to prevent NIO stock from tumbling if the broader market turns lower.
Downside Risk High if Appetite for Growth Stocks Wanes
With the odds of a correction climbing, it may be best to tread carefully with growth stocks. Whether caused by changes in Federal Reserve policy, or factors like slowing economic growth, it seems all the more likely that the runaway bull market is about to reverse course.
- Missing required attributes. Please edit.
In the event of a broader market pullback or correction, investors will shift out of speculative growth plays like NIO stock and into safer plays. This is likely to be the case even if the company meets expectations.
If Nio faces the double-whammy of disappointing results and a rocky stock market, look out below. While shares probably won’t head back to the low single-digits, investors can expect an outsized pullback compared to the broader market.
The Bottom Line on NOI Stock
Hopes for this popular EV maker run high, but the ongoing chip shortage and a slowing Chinese economy may stop Nio’s revenue growth in its tracks. And the risk of a pullback is being exacerbated by a weakening broader market.
I think there is a high probability that NIO stock trades back down to $25, or even $20 per share. So, it’s best to stay away for now.
On the date of publication, Thomas Niel did not have (either directly or indirectly) any positions in the securities mentioned in this article. The opinions expressed in this article are those of the writer, subject to the InvestorPlace.com Publishing Guidelines.
Thomas Niel, contributor for InvestorPlace.com, has been writing single-stock analysis for web-based publications since 2016.
More From InvestorPlace
- Stock Prodigy Who Found NIO at $2… Says Buy THIS Now
- Analyst Who Found Microsoft at $0.38 Names #1 Pick for the AI Boom
- America’s #1 EV Stock Still Flying Under the Radar
The post Nio Stock’s Slide Likely Isn’t Over as Broader Correction Looms appeared first on InvestorPlace.electric vehicle
Bruce Power receives regulatory approval for new lifesaving medical isotope production
TIVERTON – Bruce Power has received approval from the Canadian Nuclear Safety Commission (CNSC) to take the next step forward for new isotope production…
TIVERTON – Bruce Power has received approval from the Canadian Nuclear Safety Commission (CNSC) to take the next step forward for new isotope production becoming the first power reactor globally to commercially produce Lutetium-177, an innovative therapeutic isotope used in the treatment of prostate cancer and neuroendocrine tumors.
“This Project is an innovative partnership between Bruce Power, IsoGen, Saugeen Ojibway Nation (SON) and ITM and is a game changer for the supply of medical isotopes and the global medical community in the fight against cancer,” said James Scongack, Bruce Power Chief Development Officer and EVP Operational Services. “This is another important step forward to utilize our CANDU reactors to provide a new large-scale capacity for production in the medical isotope supply chain, cementing Canada’s place as a global isotope superpower.”
Isogen is a joint venture between Framatome and Kinectrics to enable the use of CANDU reactors to produce medical isotopes needed to treat and diagnose patients with serious diseases world-wide.
“The Framatome team conducted extensive research and development in Canada and modified German technology for use in a CANDU reactor, which resulted in the first Isotope Production System in a power reactor for commercial production of therapeutic medical isotopes,” said Curtis Van Cleve, President and CEO of Framatome Canada Ltd. “We applaud our partners at Bruce Power for their commitment to innovation that supports the continuous production of both electricity and medical isotopes, and to harnessing the therapeutic power of nuclear energy.”
The Isotope Production System (IPS), designed and manufactured by Isogen, will be used to produce Lutetium-177, an isotope used in nuclear medicines that allows for targeted and precise treatments, destroying cancer cells while limiting damage to surrounding healthy tissue and organs. The irradiated Ytterbium targets obtained from the IPS will be processed at ITM premises, where the highly pure no-carrier-added (n.c.a.) Lutetium-177 will be produced in pharmaceutical quality. N.c.a. Lutetium-177 will be marketed globally by ITM under the brand name EndolucinBeta® as well as leveraged for clinical supply to advance the company’s own pipeline. ITM is a German based leading radiopharmaceutical biotech company focused on the development, production and global supply of medical radioisotopes and radiopharmaceuticals.
“The license granted by CNSC today marks a critical milestone for Isogen on our mission to provide lifesaving medical isotopes to the world,” said David Harris, CEO of Kinectrics. “This approval showcases the advantages of bringing together the significant investments and capabilities of the partners to advance the technology, and develop the safety, engineering and licensing packages necessary to introduce such a cutting-edge technology in a safe and reliable manner without impact to normal reactor operation.”
“It is great to see the progression in the installation of the Isotope Production System, which provides us with an additional reliable source to increase the scalability of our n.c.a. Lutetium-177 production for global supply as well as the further clinical development of our broad pipeline,” commented Steffen Schuster, CEO of ITM. “We look forward to leveraging our long-term partnership with Bruce Power to deliver Targeted Radionuclide Therapy to cancer patients worldwide.”
Bruce Power’s collaboration with Saugeen Ojibway Nation (SON) will see the partners jointly marketing new isotopes in support of the global fight against cancer while also working together in creating new economic opportunities within the SON territory by establishing new isotope infrastructure.
“It’s very exciting times for SON as we move forward to the next phase of the Isotope project with Bruce Power,” said Chief Lester Anoquot, Chippewas of Saugeen First Nation. “Many members of our community have been impacted by cancer in some way. We are proud to play a leadership role in the global fight against cancer, while building economic opportunities in our community.”
The partnership, which includes an equity stake and revenue-sharing model for SON, is named Gamzook’aamin aakoziwin, which means ‘We are Teaming up on the Sickness’ in the traditional Anishinaabe language.
“The Gamzook’aamin aakoziwin project will positively impact people worldwide, well beyond the borders of our community,” said Chief Victoria Smith, Chippewas of Nawash Unceded First Nation. “This project is a groundbreaking development in the fight against cancer, and represents a positive step forward for the global medical community.”
The approved project will expand Bruce Power’s established isotope production, and will solidify the company as an integral producer of critical medical isotopes increasingly being used in innovative nuclear medicine applications.
“Ontario continues to position itself as a world leader in the production of life-saving medical isotopes,” said Energy Minister Todd Smith. “The innovation of companies like Bruce Power and its partners is critical to ensuring increased capacity of isotope production to improve global access to these essential tools in the fight against cancer. Today’s announcement is a big step forward in furthering the goal of long-term, sustainable, and flexible production of medical isotopes at the Bruce Power site.”
Bruce Power is one of the world’s largest producers of Cobalt-60 through its partnership with Nordion, used in the sterilization of single use medical equipment and in transformative cancer treatments like the Gamma Knife.
“Thanks to the investments being made into the Bruce Power site today we can look to the future and realize a vital role in providing life-saving medical isotopes to the world, while also supplying clean, reliable and low-cost electricity to Ontario, growing the economy and fostering innovation for decades to come,” said Lisa Thompson, MPP for Huron-Bruce.
Bill Walker, MPP for Bruce-Grey-Owen Sound, also offered his support and congratulations.
“The potential for growth in the isotope space provides an invaluable opportunity to leverage Ontario’s established nuclear supply chain that has developed over the past several years and is recognized as a leader around the world in isotope innovation, development and production,” said Walker. “Most importantly isotopes are making a positive difference in people’s lives every day and I am proud to be a champion of the nuclear industry.”
The work to install the Isotope Production System is a part of the ongoing Life-Extension Program at the Bruce Power site, which began in 2016 and remains on track.
As the commissioning process continues there will be additional regulatory hold points to allow CNSC staff to confirm operational readiness of the Isotope Production System (IPS) prior to the start of Lu-177 production. Bruce Power will finalize documentation and CNSC staff will review commissioning test results to verify the IPS meets its design and safety analyses requirements.ytterbium lutetium
Jelly Roll, Layer Cake or Popsicle Stick – The Evolution of Lithium-Ion Battery Shapes in EV’s
By Alf Stewart There are different forms of Lithium-Ion batteries in use today, and two…
By Alf Stewart
There are different forms of Lithium-Ion batteries in use today, and two new sizes of batteries to be introduced in the next year. This article explores the three types: pouch cells, prismatic cells and cylindrical cells. A few of the advantages of that arise from these shapes are discussed. The introduction of the Blade Battery by BYD, the largest EV manufacturer in China may signal a new trend in the shape of batteries to come
There are different forms for Lithium-Ion batteries in use today.
Pouch Cells and Prismatic Cells – Layer Cake
Prismatic cells are made up of many positive and negative electrodes layers sandwiched together leaving more possibility for short circuit and inconsistency. The higher capacity makes it difficult to protect each cell from over charging and dissipating heat. This is the form of Lithium-Ion Battery Cell used by General Motors and Hyundai. Unfortunately, these cells have been linked to some battery fires and Elon Musk that cylindrical cells are superior for protection from overheating.
These cells are rolled up layers of the positive and negative cell sandwich. Reputedly more thermally stable than prismatic cells, and they have been Tesla’s choice for all its vehicles until recently. Tesla is currently leading the charge in terms of range, energy density and safety but that title may soon pass to another form as we shall discuss.
The current generation of cylindrical cells have dimensions of 21 millimetres long by 70 millimeters in diameter. At Tesla’s Battery Day event last September, the company introduced the 46 millimeter by 80-millimeter size, the 4680 cell for its next generation battery pack. The battery pack using 4680’s will be Tesla’s own Gigafactory product, but 3rd party battery manufacturers may also supply these cells to Tesla, with final assembly into packs done at Tesla’s Berlin or Austin Gigafactories.
It is expected that the 4680 Jelly Roll style battery can be produced on an automated assembly line by the millions, but Tesla is still in the start-up phase of making these new cells at commercial scale.
The Blade Battery is an extreme form of the Prismatic Cell design with a very long and thin shape.
This shape allows the batteries to be used as strong planks in a battery pack. The batteries do not have to grouped into modules, as is common with other designs. They are also extremely stable thermally as BYD demonstrated by drilling into a standard Nickel -Cobalt- Manganese Prismatic Cell and then repeating the same experiment with a Blade Battery.
Tesla has opted for prismatic cells with Lithium-Ion Phosphate Chemistry for its Standard Range Plus Model 3 made in Shanghai. It may signal the emergence of Prismatic Cells with Lithium-Ion Phosphate chemistry as the most popular flavor in the Electric Vehicle market.lithium manganese batteries electric vehicle
Top 20 Investors Speak on Uranium’s Returned Aura
MAHLE Powertrain and Allotrope Energy unveil lithium-carbon battery technology with ultra-fast recharging
Lyten introduces next generation Lithium-Sulfur battery for EVs; 3X energy density of Li-ion
4 Hot Uranium Stocks to Buy Hyped By Reddit Retail Investors
Today’s Biggest Pre-Market Stock Movers: 10 Top Gainers and Losers on Thursday
Time To Say Goodbye To The Everything Bubble
Bryah nabs strategic exploration ground around namesake project
Cameco Signs MOU to Supply Uranium for SMR’s Built by GE Hitachi, Synthos Green Energy and GEH SMR
Eagle Mountain reckons visual mineralisation at Western Talon is ‘truly spectacular’
Energy & Critical Metals13 hours ago
4 Hot Uranium Stocks to Buy Hyped By Reddit Retail Investors
Base Metals12 hours ago
Iron-Ore Price Collapse Hits Mining Stocks
Economics24 hours ago
“Culture As An Asset”
Articles24 hours ago
Bryah nabs strategic exploration ground around namesake project
Economics12 hours ago
The Coming “Reversion To The Mean” Of Economic Growth
Economics23 hours ago
This Has To Be A Mistake
Economics23 hours ago
All Eyes On Inventory
Articles21 hours ago
Drilling kicks Off and Uranium Analysis Planned at Benmara Battery Metals Project