Connect with us

Financing News

Olivut Announces 50% Option Exercise on Seahorse Project

NOT FOR DISTRIBUTION TO UNITED STATES NEWSWIRE SERVICES OR FORDISSEMINATION IN THE UNITED STATES TORONTO, July 06, 2020 (GLOBE NEWSWIRE) — Olivut Resources…

Share this article:

Published

on

NOT FOR DISTRIBUTION TO UNITED STATES NEWSWIRE SERVICES OR FOR
DISSEMINATION IN THE UNITED STATES

TORONTO, July 06, 2020 (GLOBE NEWSWIRE) — Olivut Resources Ltd. (“Olivut” or the “Company”) (TSXV:OLV)  is pleased to announce that it has exercised its option to earn 50% of the Seahorse Project, located in the Northwest Territories, Canada in accordance with the terms of the Option Agreement signed with Talmora Diamond Inc. (“Talmora”) on July 6, 2018.  Olivut and Talmora will be joint (50/50) owners of the assets.   

All earn-in requirements have been completed: on December 9, 2019 Olivut provided notice to Talmora that it had incurred the minimum work cost requirement of $1,200,000 ($1,295,000 spent to October 31, 2019) and a cash payment of $200,000 was made to Talmora in July, 2018.  Talmora retains a 1% net smelter return royalty on certain land.

The Company considers the Seahorse Project to have the potential to host diamondiferous kimberlite bodies of significant size and perhaps other mineral deposits, based on a combination of: 2019 program results as described below; favourable diamond stability indicator minerals found regionally and locally, including 18 macro diamonds found in regional samples to the west and northwest; specific geophysical targets; regional and local faults that would favour kimberlite emplacement; occurrence of diamondiferous kimberlites  to the north and southeast, as well as other geochemical data in the area.

As previously announced, Olivut successfully completed a helimag geophysical program during April and May 2019.  Detailed, low-level, 50 metre line spacing magnetic information was collected and analyzed over multiple anomalies previously identified from regional geophysics.

During August and September 2019 six holes were drilled to test certain regional geophysical targets that had been confirmed and further delineated by the detailed helimag program.  The holes were drilled to a maximum depth of 316’ (96.3 metres) using a reverse circulation, heli-portable drill.

Beneath tills, each of the holes intersected varying depths of a distinct homogeneous, extremely fine-grained clay that did not appear to be derived from the dolomite country rock that is exposed proximal to the targets.  Down hole drilling conditions were exceptionally challenging, as was the recovery of drill sample material, due primarily to the nature of these intersected clays.  Samples were collected from each of the holes and sent for analysis to Saskatchewan Research Council (“SRC”). 

Preliminary visual inspection, as well as further microscopic examination of many of the collected samples, could not specifically identify the host rock from which the clay material is derived.  Subsequently, whole rock and multi-element geochemical results returned complex chemistry characterised by elevated Rare Earth Element (“REE”) content. Further analysis is ongoing to relate these findings to till samples taken down-ice in the general region.  These REE levels are generally higher than, or consistent with, levels of REE detected in clays found to occur over some identified kimberlites in some locations of the world (e.g. western Australia and Namibia). Sulphides, including pyrite, galena and sphalerite, as well as other mafic minerals were easily identified in many downhole samples.

The Seahorse Project area underwent periods of extreme warming and laterization that destroyed silicate indicator minerals as evidenced from regional till sampling results. However, some opaque oxide indicator minerals and diamonds survive this type of weathering.

To determine the potential presence of any kimberlitic indicator minerals (“KIM”), additional samples from five drill holes, each consisting mostly of the homogeneous clay, were submitted for heavy mineral analysis to SRC.  Chromites, ilmenites (some manganese bearing) and abundant pseudorutile (an alteration product of ilmenite which is common in intensely weathered kimberlite) are present.  Although the chromites and ilmenites are not unequivocally kimberlitic, a few definite KIMs (G-9 pyropes and picroilmenites) were recovered from beach sand concentrates taken from a lake in the vicinity of the drill holes.

A surprising result of the heavy mineral analysis is the number of microfossils and the abundance of various forms of pyrite (some replacing organic material and microfossils) found in the concentrates.  Also present are spherules (tiny bead-like features) believed to be associated with a meteorite impact. Microfossils and pyrite associated with anoxic (low oxygen) conditions require a different explanation for the origin of the clay than intensely altered kimberlite.  Given the results to date, there are a number of possible scenarios that could explain the genesis of these clays and further work is required to obtain more information before arriving at a conclusion. 

In addition to the drilling program described above, limited regional prospecting was conducted.  A large gossan zone was identified on the property comprising the Seahorse Project that appears to have a strike length of approximately eight kilometres.  Very limited sampling was conducted due to budget and fuel constraints.  Some of these samples returned trace amounts of gold which may be significant given the limited number of samples collected.  Further work is required to obtain more information before arriving at a conclusion.   The linear gossan zone occurs within the dolomite country rock and likely represents a sulphide bearing fault zone.  The Company’s interest in the Seahorse Project includes any mineral deposits discovered, whether diamonds or other minerals.

This region has been subjected to no known previous detailed exploration work. The Company will report further details once they are available.  Due to its remoteness, the project area must be supplied by small aircraft and helicopter.  Although Talmora has been active in the area of the Seahorse Project, prior to Olivut’s involvement it had not been able to conduct meaningful exploration due to a lack of financing during the prolonged negative capital market environment for junior exploration companies. 

The Coronavirus pandemic and its effects particularly on planning and work in the Northwest Territories will likely prevent any field work being conducted in 2020.  Measures have been put in place to mitigate risks to the health and safety of northern people and communities.

Olivut is a diamond exploration company with a 100% mineral interest in the HOAM Project (the “HOAM Project”) and a 50% interest in the Seahorse Project, both projects being located in Canada’s Northwest Territories.  Please visit www.olivut.com for detailed corporate and project information.

This press release contains forward-looking statements with respect to the Company, and matters concerning the raising of additional capital, the business, operations, strategy, and financial performance of the Company. Actual results may differ materially from those indicated by such statements. These statements generally, but not always, can be identified by use of forward-looking words such as “may”, “will”, “expect”, “estimate”, “anticipate”, “intends”, “believe” or “continue” or the negative thereof or similar variations. All statements, other than statements of historical fact, included herein, including, without limitations statements regarding future production, are forward-looking statements that involve various risks and uncertainties. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Such forward-looking statements are qualified in their entirety by the inherent risks and uncertainties surrounding future expectations, including that the estimates and projections regarding the Company’s properties are realized. Forward-looking statements are based on a number of assumptions which may prove to be incorrect. Unless otherwise stated, all forward looking statements speak only as of the date of this press release and the Company does not undertake any obligation to update such statements except as required by law.

Martin St. Pierre, P.Geophys., a Qualified Person as defined by National Instrument 43-101, has reviewed and approved the scientific and technical disclosure in this press release.

Leni Keough, P.Geo.
President and Chief Executive Officer

For further information, please contact:
Leni Keough
President and Chief Executive Officer
Olivut Resources Ltd.
(780) 866-2226

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

drilling
tsxv-olv
olivut-resources-ltd
cse-tai
talmora-diamond-inc
talmora diamond inc
financing
press-release

Share this article:

News Releases

Capella Announces Definitive Agreement for the Sale of is Central Norway Copper-Cobalt Projects to NickelX and Financing Update

Capella Announces Definitive Agreement for the Sale of is Central Norway Copper-Cobalt Projects to NickelX and Financing Update
Canada NewsWire
VANCOUVER, BC, Oct. 17, 2023

VANCOUVER, BC, Oct. 17, 2023 /CNW/ – Capella Minerals Ltd (TSXV: CMIL) (OTC…

Share this article:

Published

on

By

Continue Reading
Financing News

Goldgroup Announces Exercise of Cerro Prieto Purchase Option

Vancouver, British Columbia–(Newsfile Corp. – October 17, 2023) – Goldgroup Mining Inc. (TSX: GGA) (OTC PINK: GGAZF) (BMV SIX: GGAN.MX) ("Goldgroup" or…

Share this article:

Published

on

By

Continue Reading
News Releases

Colibri Provides Company Update

Dieppe, New Brunswick–(Newsfile Corp. – October 17, 2023) – Colibri Resource Corporation (TSXV: CBI) (OTC Pink: CRUCF) ("Colibri" or the "Company") is…

Share this article:

Published

on

By

Continue Reading

Trending