Connect with us

Today’s News

Golden Dawn Announces Change of Auditor

VANCOUVER, BC / ACCESSWIRE / September 8, 2021 / Golden Dawn Minerals Inc., (TSXV:GOM)(FRANKFURT:3G8C)(OTC PINK:GDMRF), ("Golden Dawn" or the "Company"),…

Share this article:

Published

on

VANCOUVER, BC / ACCESSWIRE / September 8, 2021 / Golden Dawn Minerals Inc., (TSXV:GOM)(FRANKFURT:3G8C)(OTC PINK:GDMRF), ("Golden Dawn" or the "Company"), announces that the board of directors of the Company has appointed WDM Chartered Professional Accountants Chartered Professional Accountants as the Company's new auditor, replacing Davidson and Company LLP, Chartered Professional Accountant.

The Company has filed a Notice of Change of Auditor in respect of this change under its profile on SEDAR at www.sedar.com.

On behalf of the Board of GOLDEN DAWN MINERALS INC.

Per: "Christopher R. Anderson"

Christopher R. Anderson
Chief Executive Officer

For further information, please contact:

Golden Dawn Minerals Inc. - Corporate Communications: 
Tel: 604-488-3900 
Email: Office@goldendawnminerals.com

Forward-Looking Statement Cautions:

This news release contains certain "forward-looking statements" within the meaning of Canadian securities legislation, relating to, among other things, preliminary plans for a consolidation of the Company's Shares. Although the Company believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are statements that are not historical facts; they are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes," "intends," "estimates," "projects," "aims," "potential," "goal," "objective," "prospective," and similar expressions, or that events or conditions "will," "would," "may," "can," "could" or "should" occur, or are those statements, which, by their nature, refer to future events. The Company cautions that forward-looking statements are based on the beliefs, estimates and opinions of the Company's management on the date the statements are made and they involve a number of risks and uncertainties. Consequently, there can be no assurances that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Except to the extent required by applicable securities laws and the policies of the TSX Venture Exchange, the Company undertakes no obligation to update these forward-looking statements if management's beliefs, estimates or opinions, or other factors, should change. Factors that could cause future results to differ materially from those anticipated in these forward-looking statements include the possibility that the TSX Venture Exchange will not approve the proposed share consolidation, and that the Company may not be able to raise sufficient additional capital to continue its business. The reader is urged to refer to the Company's reports, publicly available through the Canadian Securities Administrators' System for Electronic Document Analysis and Retrieval (SEDAR) at www.sedar.com for a more complete discussion of such risk factors and their potential effects.

This news release does not constitute an offer to sell or a solicitation of an offer to buy nor shall there be any sale of any of securities of the Company in any jurisdiction in which such offer, solicitation or sale would be unlawful, including any of the securities in the United States of America. The Company's securities have not been and will not be registered under the United States Securities Act of 1933 (the "1933 Act") or any state securities laws and may not be offered or sold within the United States or to, or for account or benefit of, U.S. Persons (as defined in Regulation S under the 1933 Act) unless registered under the 1933 Act and applicable state securities laws, or an exemption from such registration requirements is available.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this release.

SOURCE: Golden Dawn Minerals Inc.



View source version on accesswire.com:
https://www.accesswire.com/663259/Golden-Dawn-Announces-Change-of-Auditor

Today’s News

Global Energy Metals Announces Drilling Results at Millennium North Identifies Significant Shallow Oxide Copper Intercepts and Sulphides to 1.5%; Review Underway at Millennium Central and South

 

Vancouver, BC – TheNewswire – September 23, 2021 – Global Energy Metals Corporation (TSXV:GEMC) | (OTC:GBLEF) | (FSE:5GE1) (“Global Energy Metals”,…

Share this article:



 

Vancouver, BC - TheNewswire - September 23, 2021 - Global Energy Metals Corporation (TSXV:GEMC) | (OTC:GBLEF) | (FSE:5GE1) (“Global Energy Metals”, the “Company” and/or “GEMC”), a company involved in investment exposure to the battery metals supply chain, is pleased to advise that its partner, Metal Bank Limited (“MBK”) has completed full assay results from the initial RC drilling program at the Millennium copper, cobalt and gold (Cu-Co-Au) project near Mt Isa, Queensland (‘Millennium Project’) have now been received. This follows previous high grade Cu-Co-Au results returned from the initial two holes into the Central Area (refer to news release dated September 8, 2021).

Highlights

  • - Drilling results received from Northern Area target at the Millennium Cu-Co-Au Project in northwest QLD as part of MBK’s exclusive option to earn-in up to 80% of the project;

    - Broad copper intersections returned including:

    • - 8m @ 0.76% Cu from 62m (MI21RC05)

      - 24m @ 0.29% Cu from 0m (MI21RC06)

    - Preliminary review underway regarding current Inferred Resource of of 5.9Mt @ 1.08% CuEq1 and recent results; and

    - Further work on metal zonation and structural relationships to adjacent Pilgrim/Fountain Range Fault in Northern Extension Area in progress.

 

Results reported are from 5 drill holes targeting northern extensions 800-1000m along strike of the main Millennium Inferred Resource of 5.9Mt @ 1.08% CuEq1 as defined by Hammer Metals in 2016. Results include:

 

- 7m @ 0.30% Cu from 18m (MI21RC03)

- 8m @ 0.76% Cu from 62m (MI21RC05)

- 5m @ 0.29% Cu from 1m and 13m @ 0.32% Cu from 11m within a broader interval of 24m @ 0.29% Cu from 0m (MI21RC06)

 

Results support Metal Bank’s exploration approach at Millennium to expand the known mineralisation and justify the surface soil copper anomalism within basement rock on the eastern contact of the regional Pilgrim/Fountain Range Fault system. Importantly, substantial hydrothermal alteration is developed in this area and may indicate proximal siting for metal transport and/or deposition. This may open up potential for additional resources along strike and/or peripheral to the known resource.

 

Commenting on the findings at Millennium, Mitchell Smith, GEMC President and CEO said:

“The expansion of the Millenmium footprint to the north compliments the recent findings presented to the market in early September with the results validating our belief that there is a high potential to substantially increase the Resource at Millennium. They also highlight the high-grade nature of the project and the near-surface potential of the mineralization. We believe the trends seen from current and past exploration to be very promising and further support our strategy of advancing scalable high-grade battery metal projects through a partnership model.”

 

Also commenting on the exploration work, Inés Scotland, BMK Chair said:

Our northern extension drilling has opened up scope for additional resources at Millennium North providing us with further confidence in the expansion potential of this Project over and above the expansion of the existing Resource.  We are now evaluating potential to update that Resource and planning further extension test work for the existing Resource area and the Northern Area.”

The Millennium Project is an advanced exploration and development project located in the Mount Isa region on northwest Queensland, 19km from the Rocklands copper-cobalt processing facility. The Millennium Project holds a 2012 JORC-compliant Inferred Resource of 5.9MT @ 1.08% CuEq1 across 5 granted Mining Leases with significant potential for expansion, all proximal to processing solutions and excellent infrastructure in the Mount Isa region.

 

MBK has an exclusive 6 month option over the Millennium Project under its agreement with Global Energy Metals and its wholly owned subsidiary, Element Minerals Australia Pty Ltd.  At the end of the option period, MBK will have the right to commence a formal earn-in to earn up to an 80% interest in the Project.

 

Millennium Drilling Program

The Millennium drilling program commenced 11 August 2021 in the Southern Area (as shown in Figure 1 below), with two reverse circulation (RC) holes for 195m (MI21RC01-02) aimed at testing resource gaps and low confidence zones as part of Resource validation work.

 

A further 5 RC holes for 478m (MI21RC03-07) were completed in the Northern Area (also shown in Figure 1) testing potential for mineralisation extensions in the northern part of the Project area as indicated by previous mapping, geochemistry and structural interpretation. Refer to Table 1 and Table 2 for full drilling details.


Click Image To View Full Size

 

Figure 1: Millennium Project plan view showing interpreted basement geology, existing Millennium resource outline, previous and MBK drilling plus exploration targets with Northern Area RC drilling results.

 

Northern Area Drilling

First-pass drilling in the Northern Area for (MI21RC03-07) has been completed, testing anomalous surface Co-Cu geochemistry, previously mapped geological units and structures similar to mineralisation features in the Southern and Central Areas. This area is approximately 800-1000m north along strike, has had no previous drilling and does not form part of the existing Millennium resource. Drilling was conducted in two fences on two lines 250m apart.

 

Copper oxides were observed near surface and sulphides were observed deeper downhole, including 8m @ 0.76% Cu from 62m (MI21RC05), associated with contact zones between metasedimentary units and graphitic siltstones. Individual Cu assays peak at 1.50% from 67m depth.

 

While appearing restricted to the south and east, Cu mineralisation in the Northern Area remains open to the west, north and at depth. The relationship between this mineralisation and the Fountain Range / Quamby Fault warrants further investigation.  In addition, the eastern areas are not completely drill tested.


Click Image To View Full Size

 

Figure 2: Millennium 7724700N section showing previous resource drill holes, 2016 resource model, MI21RC05-7 drill holes and working preliminary interpretation.

 

Review

A review of the existing JORC 2012 Resource is underway to assess current scope for tonnage and grade updates, additional target areas and further work requirements in both the Southern and Central Areas of the resource.

 

The Resource review will include the two holes completed by MBK in the Central Area of the Resource and previous drilling completed by GEMC.

 

The two holes completed by MBK tested gaps in the existing resource and the potential for extensions in the northern margin of the southern area of the resource with excellent results. Several broad zones of Cu-Co mineralisation were intersected2, with results including:

 

MI21RC01

- 17m @ 0.33% Cu, 0.08% Co and 0.12g/t Au from 56m

- 16m @ 1.07% Cu, 0.26% Co and 0.40g/t Au from 80m including a high-grade zone of 5m @ 2.92% Cu, 0.50% Co and 1.19g/t Au from 82m (MI21RC01)

 

MI21RC02

- 2m @ 0.07% Cu and 0.29% Co from 41m

- 16m @ 0.34% Cu and 0.06% Co from 64m

- 3m @ 0.59% Cu and 0.14% Co from 84m

 

These results support the up-dip continuity of the Resource and potential northern extension of the southern resource model, in particular, within the current gap area between the southern and central resources.  

 

In addition, the results have identified that some higher-grade zones may remain untested within the Resource area, providing confidence in the significant growth upside of the existing Inferred Resource located in the southern and central areas of the Project.

 

Southern Area Previous Drilling

GEMC conducted a 10-hole, 1,141 metre drilling campaign on the Millennium Project during 2017 and 2018 to test the up-dip continuity at the Millennium North deposit and confirm historical estimates of cobalt mineralisation reported in 2016 by Hammer Metals.3  GEMC were successful in both duplicating historical results, demonstrating the continuity of mineralisation within the mineralised zone and in determining mineralisation continues to depth4, including 28m @0.35% Cu and 0.2% Co (MIRC026). Significantly, cobalt and copper mineralisation was encountered along the entire targeted 1500 metre strike length with the zones remaining open in all directions.5

 

Prior the GEMC’s involvement, the project area had been tested by only 73 drill holes (percussion, RC and diamond) for a total of 7,891 metres.  Most holes have been drilled within 200 metres of surface, with few holes reaching to depths greater than 250 metres below surface.  At present mineralisation remains open at depth and along the strike extent of the JORC resource area.6

 

Further Work

Pending outcomes from the Resource review and scoping work, in light of the encouraging copper results in the Northern Area further work is underway to extend the basement mineralisation, define high grade target zones and understand mineralisation relationships with the adjacent Quamby/Pilgrim Fault system. Work will also seek to determine the metal zonation aspects noted between the Northern and Central/Southern Areas.

 

In addition, the Federal and Corella Trends require assessment for potential to add additional targets and resources to the project.

 

Table 1: Completed drill hole details

Hole ID

Easting

Northing

RL

DIP

MAG AZI

AMG AZI

Depth (m)

MI21RC01

415946

7722858

237

-82

90

96

100

MI21RC02

415939

7722807

241

-78

82

88

95

MI21RC03

416316

7724444

248

-55

81

87

100

MI21RC04

416387

7724453

245

-55

83

89

95

MI21RC05

416337

7724695

250

-55

83

89

94

MI21RC06

416388

7724697

248

-55

83

89

100

MI21RC07

416450

7724700

250

-55

83

89

89

  

Table 2: MI21RC01-02 notable intersections

Hole ID

From

Interval (m)

Cu%

Co%

Au g/t

MI21RC01

46

3

0.48

0.03

0.29

MI21RC01

56

17

0.33

0.08

0.12

MI21RC01

80

16

1.07

0.26

0.40

including

82

5

2.92

0.50

1.19

and

91

1

0.12

0.50

0.02

MI21RC02

41

2

0.07

0.29

0.07

MI21RC02

45

1

0.33

0.02

0.18

MI21RC02

64

16

0.34

0.06

0.06

MI21RC02

81

82

0.08

0.20

0.02

MI21RC02

84

3

0.59

0.14

0.02

MI21RC03

18

7

0.30

<0.01

<0.01

MI21RC03

24

1

0.35

<0.01

<0.01

MI21RC03

30

1

0.21

<0.01

<0.01

MI21RC03

67

1

0.01

0.10

<0.01

MI21RC04

-

-

-

-

-

MI21RC05

20

1

0.28

<0.01

<0.01

MI21RC05

54

1

0.29

<0.01

<0.01

MI21RC05

62

8

0.76

<0.01

<0.01

including

67

1

1.50

<0.01

<0.01

MI21RC05

75

4

0.29

<0.01

<0.01

MI21RC06*

1

5

0.29

<0.01

<0.01

MI21RC06*

11

13

0.32

0.01

<0.01

MI21RC07

59

1

0.21

0.01

<0.01

  

NOTE: 0.2% Cu cut-off, 3m maximum internal dilution unless indicated by *. * within 24m @0.29% Cu from 0m (with 5m <0.2% Cu). Co values > 0.2% listed outside Cu% cut-off ranges. All results reported are downhole intervals and interpreted 70-75% true width. MI21RC01-02 results previously reported on September 8, 2021.2

 

The Millennium Project

The Millennium Project is a significant advanced copper-cobalt-gold (Cu-Co-Au) project with a large defined zone of copper-cobalt mineralisation that remains open for expansion at depth and along strike. Copper-cobalt mineralisation is associated with shear zones hosted within a sequence of volcanic and sedimentary units.

 

The Millennium Project is strategically located on granted mining leases, less than 20 km from the Rocklands mine site and processing facility and within the economic and infrastructure hub of Mount Isa, Queensland.  

 

The Mt. Isa Mineral Province is recognized as a world-class mining region, with more than a quarter of the world’s lead and zinc reserves, 5% of the world’s silver resources and 1.5% of the world’s copper resources.

 

The Project presents as an excellent opportunity to acquire a copper-cobalt asset of significant size with potential to expand mineralisation. Processing solutions and excellent infrastructure exist within the Mount Isa region of Queensland.

 

Hammer Metals Ltd (ASX: HMX) (‘Hammer Metals’) announced a maiden JORC (2012) resource in 2016 on the Millennium Projecti completed by Haren Consulting, comprised of an Inferred Resource of 5.89 million tonnes @ 1.08 CuEq (using CuEq cutoff of 0.7%), summarised in Table 2 below. The copper equivalent (CuEq) calculation for the Resource was based solely on commodity prices using the following prices: Cu: US$4,600/t; Co: US$27,000/t; Au: US$1,330/oz; and Ag: US$20/oz.

 

Table 3: Millennium JORC (2012) Resource

Cu Eq Cut-off

Tonnes

CuEq (%)

Cu (%)

Co (%)

Au (ppm)

1.00%

3,070,000

1.29

0.35

0.14

0.12

0.70%

5,890,000

1.08

0.32

0.11

0.11

  

1HMX ASX Announcement dated 6 December 2016 “Millennium Mineral Resource Estimate”.

Copper equivalent (CuEq) calculation was based solely on commodity prices using prices as follows: Cu: US$4,600/t; Co: US$27,000/t; Au: US$1,330/oz; and Ag: US$20/oz

2GEMC News Release dated 8 September 2021

3GEMC News Release dated 19 June 2018

4GEMC News Releases dated 17 January 2018, 30 April 2018 , 31 May 2018 and 19 June 2018

5GEMC News Release dated 19 June 2018

6GEMC News Release dated 6 September 2018

 

Qualified Person

Mr. Paul Sarjeant, P. Geo., is the qualified person for this release as defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects.

Global Energy Metals Corporation

(TSXV:GEMC | OTCQB:GBLEF | FSE:5GE1)

Global Energy Metals Corp. offers investment exposure to the growing rechargeable battery and electric vehicle market by building a diversified global portfolio of exploration and growth-stage battery mineral assets.

Global Energy Metals recognizes that the proliferation and growth of the electrified economy in the coming decades is underpinned by the availability of battery metals, including cobalt, nickel, copper, lithium and other raw materials. To be part of the solution and respond to this electrification movement, Global Energy Metals has taken a ‘consolidate, partner and invest’ approach and in doing so have assembled and are advancing a portfolio of strategically significant investments in battery metal resources.

As demonstrated with the Company’s current copper, nickel and cobalt projects in Canada, Australia, Norway and the United States, GEMC is investing-in, exploring and developing prospective, scaleable assets in established mining and processing jurisdictions in close proximity to end-use markets. Global Energy Metals is targeting projects with low logistics and processing risks, so that they can be fast tracked to enter the supply chain in this cycle.  The Company is also collaborating with industry peers to strengthen its exposure to these critical commodities and the associated technologies required for a cleaner future.

Securing exposure to these critical minerals powering the eMobility revolution is a generational investment opportunity. Global Energy Metals believe the the time to be part of this electrification movement.  

For Further Information:

Global Energy Metals Corporation

#1501-128 West Pender Street

Vancouver, BC, V6B 1R8

Email: info@globalenergymetals.com

t. + 1 (604) 688-4219

www.globalenergymetals.com

Twitter: @EnergyMetals | @USBatteryMetals | @ElementMinerals

Subscribe to the GEMC eNewsletter

Cautionary Statement on Forward-Looking Information:  

Certain information in this release may constitute forward-looking statements under applicable securities laws and necessarily involve risks associated with regulatory approvals and timelines. Although Global Energy Metals believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Except as required by law, the Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.  

GEMC’s operations could be significantly adversely affected by the effects of a widespread global outbreak of a contagious disease, including the recent outbreak of illness caused by COVID-19. It is not possible to accurately predict the impact COVID-19 will have on operations and the ability of others to meet their obligations, including uncertainties relating to the ultimate geographic spread of the virus, the severity of the disease, the duration of the outbreak, and the length of travel and quarantine restrictions imposed by governments of affected countries. In addition, a significant outbreak of contagious diseases in the human population could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries, resulting in an economic downturn that could further affect operations and the ability to finance its operations.

For more information on Global Energy and the risks and challenges of their businesses, investors should review the filings that are available at www.sedar.com.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

We seek safe harbour.

i 

Copyright (c) 2021 TheNewswire - All rights reserved.

Continue Reading

Today’s News

One World Lithium Announces DDH-4 Has Started at Its Salar del Diablo Lithium-Brine Project

 

VANCOUVER, BC – TheNewswire – September 23, 2021 – One World Lithium Inc. (CSE:OWLI) (OTC:OWRDF) (CNSX:OWLI.CN) (the “Company”) (“OWL”) announces…

Share this article:



 

VANCOUVER, BC - TheNewswire – September 23, 2021 - One World Lithium Inc. (CSE:OWLI) (OTC:OWRDF) (CNSX:OWLI.CN) (the “Company”) (“OWL”) announces that DDH-4 (diamond drill hole) is drilling at a location 16 kilometers north of DDH-3 or 34 kilometers south of DDH-2.  DDH-4 is currently drilling the upper part of the borehole and preparing to drill to a depth of up to 600 meters in anticipation of encountering a suspected deep brine system. DDH-3 was abandoned at 230 meters due to difficulty accessing the hole location.

 

DDH-4’s location is recommended by OWL’s Operator, Montgomery & Associates. DDH-4 has a planned total depth of 600 meters. The Operator noted “The bore hole may intersect historic and current hydrothermal activity that are evident and is often a source of lithium, such as in the Lithium Triangle in Argentina and Chile”. DDH-4 may intersect hydrothermal activity at less than 600 meters.  If DDH-4 is successful OWL may elect to drill additional holes in the southern concessions.

 

DDH-4 is the fourth exploration borehole of a four borehole program designed to explore the Salar del Diablo lithium-brine project that covers 103,450 hectares located in the State of Baja California, Mexico.  OWL currently owns a 60% property interest and on completion of the program, it will have earned an additional 20% property interest and has an option to purchase a further 10% for a total of a 90% property interest.  

 

Lithium Industry Trend.

 

As reported by Fastmarkets on September 12, 2021, the spot price of lithium carbonate has risen 23% from the previous month average, going from $ 14,630 USD to $ 19,000 USD per metric ton1.  This has also been reflected in the share prices of both junior exploration and major producers alike.

 

Update on Critical Fluid Separation Technology

 

The Company has delayed the proof of concept testing program in order to review other patented processes in the same field of use with the intention to enter into a joint venture arrangement. 

  

Mike Rosko, SME Registered member and a Qualified Person as defined by the Canadian National Instrument 43-101, has reviewed and approved the scientific and technical disclosure contained in this news release.

       

On behalf of the Board of Directors of One World Lithium Inc.

“Douglas Fulcher”

President and Chief Executive Officer

For further information please visit www.oneworldlithium.com or email info@oneworldlithium.com  or call 1-604-564-2017 Extension-3.

 

Forward-Looking Information: This press release may include forward looking information within the meaning of Canadian securities legislation. Forward looking information is based on certain key expectations and assumptions made by the management of the OWL, including the intention of OWL to proceed with the advancement of the Property or with the Separation Technology. Although OWL believes that the expectations and assumptions on which such forward looking information is based are reasonable, undue reliance should not be placed on the forward-looking information because OWL can give no assurance that they will prove to be correct. Forward looking statements contained in this press release are made as of the date of this press release. OWL disclaims any intent or obligation to update publically any forward-looking information, whether as a result of new information, future events or results or otherwise, other than as required by applicable securities laws. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from the those anticipated in such statements, important factors that could cause actual results to differ materially from the company’s expectations include: (I) inability of OWL to execute its business plan and raise the required financing (II) accuracy of mineral or resource exploration activity (III) continued access to mineral property (IV) risks and market fluctuations common to the mining industry and lithium sector in particular and (V) advancements in new separation technologies. The reader is cautioned that assumptions used in the preparation of any forward-looking information may prove to be incorrect. Events or circumstances may cause actual results to differ materially from those predicted, as a result of numerous known and unknown risks, uncertainties, and other factors, some of which are beyond the control of the OWL. The reader is cautioned not to place undue reliance on any forward-looking information contained in this press release.

Neither the Canadian Securities Exchange nor its Market Regulator (as that term is defined in the policies of the Canadian Securities Exchange) accepts responsibility for the adequacy or accuracy of this release.

  1. 1.Figures taken from Lithium price spotlight – Weekly price updates -Fastmarkets (September 12, 2021) https:/www.fastmarkets.com/commodities/industrial-minerals/lithium-price-spotlight?utm_source=spotlight-alert&utm_medium=email-rketing&utm_campaign=lithium&mkt_tok=Mzc2LUtWVi0xNzcAAAF_fH_rb4X94xcmCmKtuDWs93-1T1cNnPgmFRDpGppMpTasbdFh_zkmIHVMb5QuyjSCxj_Gqjsf9_WVavAscV7Qr0eeEH4iTFICm4DNuUXeXw 

   

Copyright (c) 2021 TheNewswire - All rights reserved.

Continue Reading

Today’s News

Alianza Intersects Additional Silver at the West Fault Complex Extending Mineralization 50 m Further to the Northeast – Haldane Silver Project, Keno Hill District, Yukon Territory

– Nine holes now outline two productive fault splays at West Fault Complex

– Six holes completed to depth intersected breccia/fault/vein zone with siderite-galena-sphalerite…

Share this article:



  • - Nine holes now outline two productive fault splays at West Fault Complex

    - Six holes completed to depth intersected breccia/fault/vein zone with siderite-galena-sphalerite mineralization

    - West Fault target remains open along strike in both directions and down dip, only 200 metres of the 1,100 metre-long structure having been tested

    - A possible southwest oriented high-grade silver high-grade shoot direction has now been revealed

 

Vancouver, BC - TheNewswire - September 23, 2021 - Alianza Minerals Ltd. (TSXV:ANZ) (OTC:TARSF) (“Alianza” or the “Company”) reports the final two holes from the 2021 drilling campaign at the Company’s wholly-owned Haldane high-grade silver property located in the historic Keno Hill Mining District of Yukon Territory. Drilling has focused on the West Fault Complex target where a strong vein-fault system with high-grade silver mineralization is being defined. Following up on the success in earlier holes, HLD21-26 and HLD21-27 have infilled and further extended the West Fault mineralization by 50 metres along strike to the northeast.

The 8,579 hectare Haldane Property is located in the western portion of the Keno Hill Silver District, 25 kilometres west of Keno City, YT. Exploration at Haldane is targeting extensions of historical high-grade silver production on the property as well as recently defined targets, such as the West Fault, in new areas of the property.

“In our two drilling campaigns over the past 12 months at Haldane, we have discovered and started to define high-grade silver bearing veins within the West Fault Complex,” stated Jason Weber, P.Geo, President and CEO of Alianza. “After the exceptional result from drilling late in 2020 in HLD20-19, our approach was to determine the orientation of high grade shoots of vein mineralization through a grid pattern of 50 metre step outs on strike and down dip. This approach was successful in extending mineralization to depth and identifying the likely orientation of high-grade silver mineralization. This drilling also indicates that the West Fault is a complex of structures and veining tends to be strongest in an upper structure (WF2) in the northeast and transitions to a lower structure (WF1) to the southwest. Although strong veining within the West Fault structure was seen in both HLD21-26 and HLD21-27, the overall width was slightly wider and the galena (and closely associated silver) content was lower in general which leads us to believe that the strongest, thickest and potentially highest grade mineralization may lie along strike to the southwest and down plunge. We look forward to our next phase of work which will target this extension.”

Table 1 – West Fault Target Drill Intercepts

Hole

From (m)

To    (m)

Interval

(m)

Est True Width (m)(1)

Silver

(g/t)

Gold

(g/t)

Lead

(%)

Zinc

(%)

Silver Eq.(2)

(g/t)

HLD21-26

270.41

275.5

5.09(3)

3.05

205

0.11

1.20

3.13

369

including

270.41

270.96

0.55

0.33

437

0.04

9.99

16.9

1383

                   

HLD21-27

225.00

233.00

8.00(3)

4.80

81.4

0.03

0.16

0.65

113

Including

225.00

225.62

0.62

0.37

342

0.06

0.37

0.49

376

  1. (1)True width of the vein and breccia mineralization is estimated to be 50-70% of the core length intersection. A value of 60% is used for the purposes of reporting HLD21-26, 27. 

  2. (2)Silver-equivalent values are calculated assuming 100% recovery using the formula: ((20 * silver (g/t) / 31.1035) + (1650 * gold (g/t) / 31.1035) + (0.90 * 2204 * lead %/100) + (1.10 * 2204 * zinc %/100)) *(31.1035 / 20). Metal price assumptions are US$20/oz silver, US$1650/oz gold, US$0.90/lb lead and US$1.10/lb zinc. 

  3. (3)Core recovery is estimated at 69% for HLD21-26 and 94% for HLD21-27 over the reported intervals.  

HLD21-26 intersected the West Fault structure at 268.43 m over a core length of 15.42 m (estimated true width of 9.25 m), exhibiting good strength and width. Strong siderite/sulphide breccia and veining was intersected at 270.41 m returning a 5.09 m (3.05 m estimated true width) intersection of 205 g/t silver (369 g/t silver-equivalent). The highest grade interval of 0.55 m (0.33 m estimated true width) of 437 g/t silver, 9.99% lead and 16.9% zinc (1,383 g/t silver-equivalent) consisted of very strong siderite-galena-sphalerite with trace tetrahedrite in veins and breccia. Siderite/sulphide veining is bounded on both sides by zones of clay-gouge with elevated silver content.

HLD21-27 intersected the West Fault structure at 222.40 m over a core length of 16.75m (estimated true width of 10.05 m). Strong siderite vein and vein breccia with banding open-space fill textures was intersected at 225.00 m, returning an 8.00 m (4.80 m estimated true width) intersection of weakly mineralized material grading 81.4 g/t silver (113 g/t silver-equivalent).  This intersection expanded vein mineralization at the West Fault 50 m to the northeast along strike from HLD20-19 that intersected 8.30 m (4.48 m estimated true width) of 444 g/t silver (554 g/t silver-equivalent).  Although the vein and vein breccia was wide and consisted of textures associated with productive mineralization, it was moderately to strongly oxidized with remnant sulphides occurring predominantly as disseminated blebs indicating a lower overall original galena and sphalerite content.

Holes HLD21-26 and -27 intersected the upper WF2 vein. Our current interpretation is that a “step over” from the WF1 vein to the WF2 occurs in the vicinity of the HLD21-24 and -25, where the width and grade of the vein is the strongest. The orientation of the step over is not definitive, but one possibility is that it plunges steeply to the southwest in the plane of the West Fault Complex and high-grade shoot geometries could also be aligned in this direction.

Our current level of understanding indicates that stepping out along strike to the southwest and down dip along the structure from HLD21-24 and -25, where our highest grades and thicknesses of veining to date have been intersected, is most prospective. However, the possibility still remains that stronger mineralization may redevelop along strike to the northeast of HLD21-26, and -27 where in excess of 350 m of structure remains open.

The West Fault Complex is traced for over 650 metres and can be interpreted to extend to 1.1 kilometres in length before merging with the 2.2 kilometre-long Main Zone structure.  Drill testing to date covers only a fraction of the West Fault Complex target. The current program systematically tested the structure in approximate 50 metre step-outs along strike and down dip of HLD2-19, the first hole at the West Fault to identify high grade silver mineralization over wide intervals, including 8.72 m (true width) averaging 311 g/t silver, 0.89 g/t gold and 1.13% lead with a higher grade interval of 1.78 metres of 818 g/t silver. Systematic step-outs resulted in additional high grade mineralization in HLD21-24 (3.14 m averaging 1,351 g/t silver, 2.43% lead, 2.91% zinc including 1.26 metres averaging 3,267 g/t silver, 5.80% lead, 7.02% zinc) and HLD21-25 (363 g/t silver, 1.73% lead and 2.80% zinc over a true width 4.27 metres with a high grade interval of 1,107 g/t silver, 6.98% lead and 3.97% zinc (over 1.00 metre). Silver mineralization has now been intersected in nine holes that pierce the WF1 and WF2 veins over 90 metres of dip direction and 100 metres of strike direction. The West Fault Complex is one of four high-priority silver-lead-zinc-bearing vein drill targets at Haldane.


Click Image To View Full Size

 

Fig 1. West Fault Complex Plan Map.

 


Click Image To View Full Size

 

Fig 2. Cross section – West Fault drill holes HLD20-19, HLD21-25 and HLD21-26.

 


Click Image To View Full Size

 

Fig 3. Cross section – West Fault drill hole HLD21-27.

 


Click Image To View Full Size

 

Fig 4. West Fault Inclined Long Section. Long-Section view looking southeast. Section cut in the plane of the West Fault.

Quality Assurance / Quality Control

All samples were analyzed by 33 element four acid digestion ICP-MS methods at ALS Canada Ltd. Sample preparation was completed in Whitehorse, Yukon and geochemical analyses were performed in Vancouver, British Columbia. Samples with over limit silver and gold were re-analyzed using a 30-gram fire assay fusion with a gravimetric finish. Over-limit lead and zinc samples were analyzed by four acid digestion and atomic absorption spectrometry. All results have passed the QA/QC screening by the lab Equity Exploration Consultants Ltd, of Vancouver BC is executing and managing the Haldane Project. Equity utilized a quality control and quality assurance protocol for the drill core sampling, including blank, duplicate, and standard reference samples.

About Alianza Minerals Ltd.

 

Alianza employs a hybrid business model of joint venture funding and self-funded projects to maximize opportunity for exploration success. The Company currently has gold, silver and base metal projects in Yukon Territory, British Columbia, Colorado, Nevada and Peru. Alianza currently has one project (Tim, Yukon Territory) optioned out to Coeur Mining, Inc. and is actively seeking partners on other projects.  

 

The Company is listed on the TSX Venture Exchange under the symbol “ANZ” and trades on the OTCQB market in the US under the symbol “TARSF”.

Mr. Jason Weber, P.Geo., President and CEO of Alianza Minerals Ltd. is a Qualified Person as defined by National Instrument 43-101. Mr. Weber supervised the preparation of the technical information contained in this release.

For further information, contact:       

Jason Weber, President and CEO

Sandrine Lam, Shareholder Communications

 

Tel:  (604) 807-7217                              

Fax: (888) 889-4874

 

Renmark Financial Communications Inc.

Scott Logan

slogan@renmarkfinancial.com

Tel: (416) 644-2020 or (212) 812-7680

www.renmarkfinancial.com

  

To learn more visit: www.alianzaminerals.com

       
 

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE. STATEMENTS IN THIS NEWS RELEASE, OTHER THAN PURELY HISTORICAL INFORMATION, INCLUDING STATEMENTS RELATING TO THE COMPANY'S FUTURE PLANS AND OBJECTIVES OR EXPECTED RESULTS, MAY INCLUDE FORWARD-LOOKING STATEMENTS. FORWARD-LOOKING STATEMENTS ARE BASED ON NUMEROUS ASSUMPTIONS AND ARE SUBJECT TO ALL OF THE RISKS AND UNCERTAINTIES INHERENT IN RESOURCE EXPLORATION AND DEVELOPMENT. AS A RESULT, ACTUAL RESULTS MAY VARY MATERIALLY FROM THOSE DESCRIBED IN THE FORWARD-LOOKING STATEMENTS.

Copyright (c) 2021 TheNewswire - All rights reserved.

Continue Reading

Trending